.jpg "Lusin Clean MC 1718")
Lusin Clean MC 1718
Code: MC1718
Description - Lusin® MC1718 is an organic cleaning agent that is especially suitable for removing tenacious resin and other residues from metal surfaces. It offers the thermoplastics industry the latest innovative technology and significant performance improvement. Lusin MC1718 also is effective at dissolving adhesives, glues, oil, wax and grease residues.
Application - Lusin® MC1718 is used for the cleaning of dirty moulds and for dissolving polymer residues (e.g., PVC, POM, polyamides, acrylates, etc.). Spray Lusin® MC1718 on contaminated moulds, allow the product to react and then remove it by producing parts (they will initially show affected surfaces). The product can also be removed by using a cloth wipe.
Benefits
- Removes polymer residues
- Rapid cleaning effect
- Dissolve oil, wax and grease residues
Packaging - Aerosol: 400 mL
Lusin® MC1718 mold cleaner is recommended and tested given its proven capability to substantially minimize buildup in the mold. Lusin® MC1718 is used for the cleaning of dirty moulds and for dissolving polymer residues (e.g., PVC, POM, polyamides, acrylates, etc.). Spray Lusin® MC1718 on contaminated moulds, allow the product to react and then remove it by producing parts (they will initially show affected surfaces). The product can also be removed by using a cloth wipe. If required, the procedure can be repeated several times at increased temperatures and longer reaction time (1 hour maximum).
The product is applied directly to the mold cavity between two cycles, and after some reacting time, polymer buildups were softened and pulled from the mold through the process of producing parts. This method not only allowed for a quick and easy cleaning without having to dismantle and handle the mold, but it also enabled the thorough cleaning of hard-to-reach areas. The new approach is proven successful and implemented into a new regular maintenance routine
In case of production stoppage, after having cleaned the surface with Lusin® MC1718, an anti-corrosion agent like Lusin® Protect O 45 F (if NSF compliance is required) should be applied; in all other cases Lusin® Protect G 31 or Lusin® Protect G 11 can be used.
More detailed application instructions for your specific process may be obtained from our technical representative.
How to Care for a Built-in Mold: Clean, Lubricate, Protect and Release
How to Use Lusin® Products to Clean and Degrease a Disassembled Mold
How to Maintain and Degrease a Built-in Mold
