Lusin LUB O 32 F

Lusin® Lub O 32 F can be used as lubricant or release agent in the packaging industry. Lusin® Lub O 32 F applied on a die, e.g. blown film application, reduces the build-up during production. If Lusin® Lub O 32 F is applied to the outside surface of PET preforms or bottles, it reduces scratches to the plastic surfaces occurring during transport and handling, to an absolute minimum and reduces significantly the tendency of blocking of bottles during transport. Lusin® Lub O 32 F is suitable as a lubricant in the PIC (process integrated coating) process. Dilution with water is not recommended because the tubes might be blocked by high viscous fractions.

Lusin® Lub O 32 F can be removed with a mixture of water and alcohol. Based on the current knowledge we recommend a cleaning cycle of two months.
In terms of lubrication of the outside surface of PET preforms, Lusin® Lub O 32 F should be applied undiluted using Steidle spray equipment. The product is also suitable as a release agent in the thermoplastic processing industry. The mold temperature should not exceed 200°C in terms of injection molding, for film applications the die temperature should not exceed 190°C.

Benefits

• 100% active ingredient
• Highly effective
• Silicone-free
• Solvent-free
• Environmentally friendly
• NSF registered conforms to H1 listing requirements

More detailed application instructions for your specific process may be obtained from our technical representative.