Trekker
Code: JCB06
- Buff Nubuck Leather.
- 4 Brass Eyelet & 2 Hooks for Speed Lacing.
- Imported 200J, EN12568 Steel Toe Cap.
- Quick Sweat Absorbing Mesh Lining.
- Padded Collar and Padded Bellow Tongue.
- Heat Resistant – 150°C.
- Oil & Chemical Resistant Antistatic Sole.
- Anti-Slip Sole SRC.
- Direct Injected Double Density PU Sole.
- EN ISO 20345 & IS 15298 (II).
- Light weight and comfortable.
Trekker is our iconic & stylish leather safety boot, offering very high wearer comfort, high breath ability, highest slip resistance. Thanks to its lightweight design incorporating tropicalized high-tech materials, and ergonomically designed out sole. Trekker the ideal companion for the 24X7working.
Industries: General, Engineering, Automobile, Construction
Environments: Dry environment, Extreme slippery surfaces, Uneven o surfaces, upto 130 c
Maintenance instructions: To extend the life of your shoes, we recommend to clean them regularly and to protect them with adequate products. Do not dry your shoes on a radiator/Hair Dryer nor nearby a heat source.
|
DESCRIPTION |
SPECIFICATION |
|
Brand & Article |
JCB TREKKER (Ankle Safety Footwear) |
|
Operative Standard |
Meets IS 15298: 2016 Part II |
|
Description |
Lace up Beige Safety Ankle Boot, Double Density, Direct Injected (on DESMA) PU Sole, Safety Footwear. Nail less Strobel Construction As per Design B. |
|
Sizes |
UK (Range 5-12) |
|
Height & Size Of Shoe |
More Than 113 mm But Less Than 178 mm. |
|
Color |
Beige Except Color Which Is Black. |
|
Eyelets & Hooks |
4 hexagon Brass eyelets & 2 Brass Hooks. |
|
Marking |
As Per IS 15298 (Part 2) : 2016 Clause 7 ISI Marked. |
|
Electrical Properties |
Antistatic, Resistance Between 100 Kilo ? Ohms & 1000 Mega ? Ohms. |
|
Upper Leather |
Nubuck Leather. |
|
Vamp Lining |
Non Woven Polyester 250 GSM |
|
Tongue & Collar |
Leather Padded |
|
Lining Other Than Vamp |
Non Woven. |
|
Socks |
Full EVA Molded ANTISTATIC. |
|
Insole |
Non Woven Antistatic More Than 2 Mm Thickness. |
|
Out Sole |
PU Double Density Black In Color |
|
Sole Fixation |
Direct Injection Process On DSMA Machines |
|
Heel Stiffener |
Molded TP Stiffener For Additional Support. |
|
Upper/ Outsole Bond Strength |
As Per 5.3.1.2 Of Is 15298 (Part 2):2016 |
|
Impact Resistance Of Toe Cap |
As Per 5.3.2.3 Of Is 15298 (Part 2):2016 |
|
Upper Thickness |
As Per 5.4.2 Of Is 15298 (Part 2):2016 |
|
Upper Tear Strength |
As Per 5.4.3 Of Is 15298 (Part 2):2016 |
|
Upper Ph Value |
As Per 5.4.7 Of IS 15298 (Part 2):2016 |
|
Quarter Lining Tear Strength |
As Per 5.5.1 Of Is 15298 (Part 2):2016 |
Boucher: Download
